EL 600E: The small extruder with grand features

Scroll

EL 600E: The small extruder with grand features

The Elematic Extruder EL 600E has a long and successful history as a lightweight, economical machine for precasters who need a limited variety of hollow-core slab sizes. Now the little brother of the extruder family has been equipped with the latest technology and ergonomic functions, and has been designed a new look as well.

In the spirit of caring equally for all our customers, the advanced evolution model EL 600E has been designed to resemble its bigger brothers in the extruder family. Precast manufacturers with small-scale production or those wanting to start up with a moderate investment, can now enjoy the latest inventions in machinery development that have optimized the compaction of concrete. Our product range has included an economical, lightweight extruder for as long as anyone can remember, but the name of the machine has changed a couple of times over the years. It has previously been known as the Extruder LPE 600 and after that the EL 600. As with the other Elematic extruders, the original shear compaction technology makes EL 600E silent, adding a significant comfort factor to the production environment for workers to enjoy. Compared to its brothers, it is a lighter and more low-built machine that is easy to handle and is therefore well suited for facilities, where you may not have room for crane-technology. Although the affordable EL 600E still focuses on the fundamentals and leaves the delicacies to the 900-series, it offers you advanced cross-section technology: cross-sections range from 150 mm to 265 mm. The slab height can be changed easily and the casting width can be up to 1.2 m. You can produce pre-stressed hollow-core slabs and wall panels with 8 or 6 voids. It casts the slabs in one phase and forms the voids through the pressure of the feeding screws and the mechanically moving hollow tubes. It is a compact unit, with fixed power and nozzle units. The new design of the EL 600E makes it all the more user-friendly and easy to keep clean, not to mention easier to service. The wear parts are made of new and improved materials, making them truly long-lasting. You are ensured an even-quality and accurate end product, as the machine has some extra weight at the back, which you can vary according to need. In addition, all the functions are electromechanical, meaning that you do not need to monitor the casting stages or make adjustments while casting. All in all, the EL 600E is a reasonable machine with all the essentials needed to successfully produce high-quality products with cost-efficiency and ease. The little brother of the Elematic extruder family is following in the foot steps of its bigger brothers.

Share: